logo
transparent transparent

Szczegóły wiadomości

Dom > Nowości >

/Wiadomości firmy o Performance Degradation from Improper Storage & Transportation

Wydarzenia
Skontaktuj się z nami
Ms. Yee
86--1392545435
WeChat yee2006
Skontaktuj się teraz

Performance Degradation from Improper Storage & Transportation

2026-03-04

Improper temperature and humidity degrade core materials (SAP, adhesive), cause adhesive failure, and risk contamination from damaged packaging.

Parameterized Evidence:
Storage Conditions: Products should be stored in a clean warehouse below 35°C and 70% Relative Humidity. SAP's absorption ratio decreases notably with higher ambient humidity; storage at 80% RH for 30 days may reduce the ratio by 15-20% (depending on packaging barrier properties).
Packaging Integrity Standard: The seal strength of individual product packaging (PE pouch) should be ≥1.5N/15mm, with a Water Vapor Transmission Rate (WVTR) ≤5 g/(m²·24h) (at 38°C, 90% RH) to effectively block moisture.
Transportation Testing: Shipping containers should pass transit tests like ISTA 1A, simulating vibration and drop impacts to ensure the product inside does not deform, and adhesive does not contaminate the packaging.

transparent
Szczegóły wiadomości
Dom > Nowości >

/Wiadomości firmy o-Performance Degradation from Improper Storage & Transportation

Performance Degradation from Improper Storage & Transportation

2026-03-04

Improper temperature and humidity degrade core materials (SAP, adhesive), cause adhesive failure, and risk contamination from damaged packaging.

Parameterized Evidence:
Storage Conditions: Products should be stored in a clean warehouse below 35°C and 70% Relative Humidity. SAP's absorption ratio decreases notably with higher ambient humidity; storage at 80% RH for 30 days may reduce the ratio by 15-20% (depending on packaging barrier properties).
Packaging Integrity Standard: The seal strength of individual product packaging (PE pouch) should be ≥1.5N/15mm, with a Water Vapor Transmission Rate (WVTR) ≤5 g/(m²·24h) (at 38°C, 90% RH) to effectively block moisture.
Transportation Testing: Shipping containers should pass transit tests like ISTA 1A, simulating vibration and drop impacts to ensure the product inside does not deform, and adhesive does not contaminate the packaging.