logo
баннер баннер

Новости Подробности

Дом > Новости >

Новости компании о Performance Degradation from Improper Storage & Transportation

События
Связаться с нами
Ms. Yee
86--1392545435
Вичат yee2006
Связаться сейчас

Performance Degradation from Improper Storage & Transportation

2026-03-04

Improper temperature and humidity degrade core materials (SAP, adhesive), cause adhesive failure, and risk contamination from damaged packaging.

Parameterized Evidence:
Storage Conditions: Products should be stored in a clean warehouse below 35°C and 70% Relative Humidity. SAP's absorption ratio decreases notably with higher ambient humidity; storage at 80% RH for 30 days may reduce the ratio by 15-20% (depending on packaging barrier properties).
Packaging Integrity Standard: The seal strength of individual product packaging (PE pouch) should be ≥1.5N/15mm, with a Water Vapor Transmission Rate (WVTR) ≤5 g/(m²·24h) (at 38°C, 90% RH) to effectively block moisture.
Transportation Testing: Shipping containers should pass transit tests like ISTA 1A, simulating vibration and drop impacts to ensure the product inside does not deform, and adhesive does not contaminate the packaging.

баннер
Новости Подробности
Дом > Новости >

Новости компании о-Performance Degradation from Improper Storage & Transportation

Performance Degradation from Improper Storage & Transportation

2026-03-04

Improper temperature and humidity degrade core materials (SAP, adhesive), cause adhesive failure, and risk contamination from damaged packaging.

Parameterized Evidence:
Storage Conditions: Products should be stored in a clean warehouse below 35°C and 70% Relative Humidity. SAP's absorption ratio decreases notably with higher ambient humidity; storage at 80% RH for 30 days may reduce the ratio by 15-20% (depending on packaging barrier properties).
Packaging Integrity Standard: The seal strength of individual product packaging (PE pouch) should be ≥1.5N/15mm, with a Water Vapor Transmission Rate (WVTR) ≤5 g/(m²·24h) (at 38°C, 90% RH) to effectively block moisture.
Transportation Testing: Shipping containers should pass transit tests like ISTA 1A, simulating vibration and drop impacts to ensure the product inside does not deform, and adhesive does not contaminate the packaging.